Sauna Logo Wood Fired Sauna Heaters Electric Sauna Heaters Infrared Sauna Heaters Sauna Accessories Complete Sauna Kits Sauna Special
Issue : #2132
problem with VSP-VS501Z-CCAH

Connector J18 is no longer providing the voltage required to drive the Silver Water System Model A-650 that was supplied with the spa. Can you advise?

 
RE: problem with VSP-VS501Z-CCAH
If you have an ozonator you are using J29 for the ozonator and the White wire jumper W2 is connected to a WHT AC terminal.  That supplies both J47 and J29 with 120 volts.The W1 white wire is moved to RED AC. If your pump is 240 volts. The ionizer adapter cable plugs into J47. All dip switches are down with this new board, if your panel has a TEMP button.  A7 is UP, if you have the Warm and Cool buttons.