Spa Clear - Concentrated Clarifier - 500 mL

Super Highly-Concentrated Clarifier.

The "Polishing Touch" for Crystal Clear Water

Hot tubs are small bodies of water with a heavy "bather load." Between body oils, lotions, soap residue from bathing suits, and the turbulence of the jets, the water can easily turn dull or hazy.1 Often, the particles causing this haze are too small for your filter cartridge to catch.

Spa Clear is the solution.

This is a Super Highly-Concentrated Coagulant. It works like a magnet for microscopic debris. When you add it to the water, it causes tiny particles of dirt and oil to clump together into larger solids.2 Once they are clumped, your filter can easily trap them, removing them from the water permanently.

Why use Spa Clear?

• Instant Sparkle: Turns dull, flat water into "High-Definition" water that sparkles under the lights.

• Filter Booster: It makes your paper cartridge filter more efficient by giving it larger particles to grab.

• Chlorine Saver: By physically removing organic waste (instead of forcing chlorine to burn it up), your sanitizer lasts longer.

• Soap & Oil Defense: Specifically designed to target the body oils and soap residues that plague hot tubs.

Is it safe?

Yes. Spa Clear is non-toxic, pH neutral, and biodegradable.3 You can soak in the tub immediately after it has mixed in. It is compatible with all sanitizers (Chlorine, Bromine, Ozone, and Salt).

Directions for Use

1. Weekly Maintenance (The Polish)

To keep water sparkling:

• Add 15 mL per 1,000 Liters of spa water.

• Turn the jets on for a few minutes to mix, and ensure the filtration cycle runs for at least 2 hours.

2. The "Power Scrub" (For Persistent Haze)

If your water is cloudy and won't clear up:

• Add 15 mL of Spa Clear per 1,000 Liters.

• Add 100 g of [Spa Shock] (Non-Chlorine Oxidizer) per 1,000 Liters.

• Run the filter for 2 hours.

• Important: After 2 hours, take your filter cartridge out and rinse it. It will likely be full of the debris that Spa Clear collected!