Spa Shock - 1 Kg

Spa Shock - 1 Kg

Maximize effectiveness of Bromine and Chlorine for spa/hot tub sanitation.

The "Breath of Fresh Air" for Your Hot Tub Water

Does your spa water look dull? Do you smell a strong "chemical" odor even though your levels test fine? That isn't the smell of sanitizer; it's the smell of spent waste (Chloramines or Bromamines).

Spa Shock is the powerful, chlorine-free oxidizer that eliminates these problems.

Think of sanitizers (Chlorine/Bromine) as the "Soldiers" that kill bacteria. Think of Spa Shock as the "Clean-Up Crew." It burns off the dead bacteria, body oils, and sweat that the sanitizers leave behind, freeing them up to work effectively again.

The "Reactivation" Effect (Save Money)

If you use Bromine, this product is your best friend.

• How it works: When Bromine kills a germ, it becomes a useless "Bromide Salt." It's still in the water, but it can't kill anything.

• The Magic: Adding Spa Shock hits those useless salts with oxygen, instantly reactivating them back into fighting Bromine sanitizer.

• The Result: You use less Bromine tablets/granules because the Shock recycles what is already in the water!

Why use Non-Chlorine Shock?

1. Swim Immediately: Unlike chlorine shock, which forces you to wait 24 hours for levels to drop, Spa Shock dissolves instantly. You can jump back in the tub just 15 minutes after dosing.

2. Odor Eater: It destroys the organic contaminants that cause eye irritation and that "stale pool" smell.4

3. pH Neutral: It will not mess up your water balance or spike your pH levels.

Directions for Use

1. After Every Soak (Maintenance):

To keep water crystal clear and prevent odors from building up:

• Add 100 grams (approx. 3-4 oz) per 1,500 Liters of water after you get out.

• Run the jets for 15 minutes with the cover off to allow the gases to escape.

2. For Cloudy Water:

If the water is hazy, add the standard dose and run the filtration cycle for 2 hours. If it does not clear, check your pH and clean your filter cartridge.

• Spa Shock will destroy foreign contaminants which reduce the effectiveness of Bromine and Chlorine as a disinfectant.
• Spa Shock is completely soluble and will not alter pH.

Specifications

• Active Type: Potassium Monopersulfate (MPS) - Chlorine Free

• Format: Fast-Dissolving Granules

• Size: 1 Kg (2.2 lbs) Pail

• Benefit: Reactivates Bromine / Clears Water

• Compatibility: Works with Chlorine, Bromine, and Mineral Systems. Safe for Wood, Acrylic, and Vinyl.

Add 100 grams of Spa Shock per 1,500 liters of water after each use or when spa/hot tub water is cloudy.