Quick Clear - Concentrated Water Clarifier 1L

Quick Clear - Concentrated Water Clarifier 1L

The "Finishing Polish" for High-Definition Water

Sometimes your pool isn't dirty, it's just... dull. You might have balanced chemicals and a running filter, but the water looks "flat" or hazy. This is caused by microscopic particles (dead algae, pollen, dust) that are so small, they pass right through your filter sand or cartridge.

Quick Clear is the solution.

This highly concentrated liquid acts as a pool water polisher. It works like a magnet for those tiny particles, causing them to clump together (coagulate) into larger sizes. Once they are clumped, your filter can easily trap them, removing them from the water permanently. The result is that "sparkling" look you usually only see in commercial resort pools.

Why use Quick Clear?

• Filter Booster: It makes your sand or cartridge filter more efficient by giving it something substantial to catch.

• Chlorine Saver: By helping the filter remove organic solids physically, your chlorine doesn't have to waste energy burning them up. This reduces your overall chlorine demand.

• pH Neutral: It works at any pH level and will not affect your water balance.1

• Non-Toxic: Safe for swimmers and pets immediately after mixing.

Clarifier vs. Flocculant: Which do you need?

• Use Quick Clear (Clarifier): If your water is just hazy or dull. You pour it in, and the filter does the work. (Easier, no vacuuming required).

• Use [C-Clear Flocculant]: If your water is a swamp (can't see the bottom). Floc drops dirt to the floor and requires manual vacuuming.

Directions for Use

1. The "Premix" Rule

Because this formula is concentrated and thick (blue liquid), never pour it straight into the skimmer.

• Step 1: Dip a clean bucket into the pool to get some water.

• Step 2: Mix the required amount of Quick Clear into the bucket (Ratio 1 part chemical to 3 parts water).

• Step 3: Pour the mixture around the edges of the pool or slowly into the skimmer.

2. Dosage Guide

• Cloudy Water / Spring Opening: Add 25 mL per 10,000 Liters of water.

• Weekly Maintenance: Add 25 mL per 20,000 Liters of water.

  • Note: A standard backyard pool is approx 40,000 - 80,000 Liters. A little goes a long way!

3. The Run Time

Keep your pump and filter running for at least 8 hours (or overnight) after application. This gives the product time to circulate and the filter time to catch the debris.

• After: If your pressure gauge rises, backwash the filter or rinse the cartridge to flush out the trapped dirt.

Directions:

1. Premix Quick Clear thoroughly with 3 times the amount of pool water. Never premix with other pool chemicals.
2. Pour around the edge of the pool as well as add through the skimmer.
3. To allow for total circulation, keep the filter running overnight or for 8 hours.
4. Backwash filter if necessary, then vacuum.

Specifications

• Format: Blue Liquid Concentrate
• Size: 1 Liter (33.8 fl oz)
• Function: Water Polisher / Coagulant
• Compatibility: Safe for Sand, Cartridge, and DE Filters.

 

Size: 1L (0.26G)